Ide Hdd Block Mode - SOYO SY-6ICA User Manual

BIOS Setup Utility

3-5.3 IDE HDD Block Mode

IDE HDD Block Mode
3-5.4 FDC Controls
FDC Controls
Onboard FDC
controller
3-5.5 Onboard Serial Ports
Onboard Serial
Ports
Onboard
Serial Port 1 /
Serial Port 2
UART Mode
Select
If [UART Mode Select] is set to [IrDA]/[ASKIR]
RxD, TxD Active Hi, Hi, Lo, Lo,
IR Transmission
delay
Setting
Disabled
Enabled
Setting
Disabled
Enabled
Setting
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
Normal
IrDA
ASKIR
Lo, Hi, Hi, Lo
Disabled
Enabled
Description
Invokes multi-sector
transfer instead of one
sector per transfer. Not
all HDDs support this
function.
Description
Turn off the on-board
floppy controller
Use the on-board floppy
controller
Description
Choose serial port 1 & 2's I/O
address.
Do not set port 1 & 2 to the
same address except for
Disabled or Auto.
The second serial port offers
these InfraRed interface
modes.
This item allows you to
determine the active of RxD,
TxD.
Some IR devices need this
item enabled.
69
SY-6ICA
Note
Default
Note
Default
Note
Default
(port 1)
Default
(port 2)
Default
Default