Advantage Engineering Maximum Instruction Manual page 9

MK Series Portable Chiller : Air-Cooled : HE INSTRUMENT
1.4 SAFETY
A. It is important to become thoroughly familiar with this manual and
the operating characteristics of the unit.
B. It is the owner's responsibility to assure proper operator training,
installation, operation, and maintenance of the unit.
C. Observe all warning and safety placards applied to the chiller.
Failure to observe all warnings can result in serious injury or death
to the operator and severe mechanical damage to the unit.
1.5 CLEAN AIR ACT
A. The unit contains HCFC-22 (chlorodifloromethane). This is a class 2
substance.
B. Effective July 1, 1992, it is unlawful for any person in the course of
maintaining, servicing, repairing, or disposing of refrigeration
equipment to knowingly vent or otherwise dispose of any class 2
substance used as a refrigerant in the manner which permits such
substance to enter the atmosphere.
C. De minimis releases associated with good faith attempts to
recapture, reclaim or recycle such substance shall not be subject to
the prohibition set forth in the preceding paragraph.
1.6 MISCELLANEOUS
A. The unit is designed to circulate temperature stabilized fluid
through the process resulting in process temperature control.
B. The ability of the unit to maintain process temperature control is
significantly affected by the method of installation as outline in
section 2 of this manual.
C. If the operator has any questions concerning the location and
operation of the unit, contact the ADVANTAGE Service Department
at 317-887-0729.
ADVANTAGE ENGINEERING, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729 Fax: 317-881-1277
Service Department Fax: 317-885-8683
Email: service@AdvantageEngineering.com
Page: 9