Advantage Engineering Maximum Instruction Manual page 29

MK Series Portable Chiller : Air-Cooled : HE INSTRUMENT
D. TEMPERATURE DISPLAY
1.
2.
3.
4.
E. SETUP DISPLAY
1.
(figure 3.3C)
TO: illuminates when the 'to process' water
temperature displayed. TO is the default setting of the
TEMPERATURE DISPLAY window.
FROM: illuminates when the 'from process' water
temperature is selected. Note: the instrument will revert
back to the TO process temperature display after 10
seconds if the FROM process temperature display was
selected and left in that state.
a. Use the SELECT key to index to the FROM
indication lights. The 'from process' temperature
will be displayed in the TEMPERATURE DISPLAY
window.
°C: illuminates when the °C (Celsius) temperature display
parameter is selected.
°F: illuminates when the °F (Fahrenheit) temperature display
parameter is selected. °F is the default setting of the
instrument.
(figure 3.3D)
When the SELECT key is pressed, the display will
cycle forward through all available setup parameters. The
selected setup parameter is indicated in the
TEMPERATURE DISPLAY (i.e. 'SP' for setpoint, 'tON' for
tons) and the parameter value is displayed in the SETUP
DISPLAY window. Values are selected with the Up and
DOWN arrows keys.
ADVANTAGE ENGINEERING, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729
Service Department Fax: 317-885-8683
Email: service@AdvantageEngineering.com
Fax: 317-881-1277
Figure 3.3C
Figure 3.3D
Page: 29