Advantage Engineering Maximum Instruction Manual page 35

MK Series Portable Chiller : Air-Cooled : HE INSTRUMENT
I. MACHINE STATE DISPLAY
1.
2. SOLID YELLOW: if the process temperature
deviates outside the programmed setting.
3. FLASHING RED: If the temperature remains
out of band for 90 seconds or more. The
alarm circuit is activated.
b. FLOW: illuminates according to the current state of
flow:
1. SOLID GREEN: the process flow is within
the programmed parameters.
2. FLASHING RED: if the flow deviates
beyond the programmed parameters.
3. SOLID RED: if the flow had once deviated
but is now within the programmed
parameter.
c. WATER LEVEL:
1. SOLID GREEN: the reservoir water level is
at proper operating level.
2. FLASHING RED: the reservoir water level
has dropped below the proper operating
level. The automatic water make-up system
has activated to restore the water level.
(figure 3.3H)
Machine status lights indicate the operating status of
several machine components. Further operational
information for each component is located in section 6.0
Consult the section 4.0 for troubleshooting information. For
each component:
a. SOLID GREEN: indicates the component is
currently at an acceptable run condition.
ADVANTAGE ENGINEERING, INC.
525 East Stop 18 Road Greenwood, Indiana 46142
317-887-0729
Service Department Fax: 317-885-8683
Email: service@AdvantageEngineering.com
Fax: 317-881-1277
Figure 3.3H
Page: 35