Danfoss ECtemp 535 User Manual page 13

ECtemp 535
4. Use ▲▼ to change the start time of
this period (in increments of 15 mi-
nutes) and press • to accept .
5. Repeat Step 4 to define the start time of the day, eve-
ning and night periods.
Note: When setting the time periods you cannot go
back to the previous time period until the last one is
set. This is to ensure that the periods do not overlap.
6. Press • again and the preset comfort temperature
starts flashing.
7. Use ▲▼ to change it and press • to accept .
8. Press • again and the preset economy temperature
starts flashing.
9. Use ▲▼ to change it and press • to accept .
It can also be set to "off".
User Guide 13