Settings in the BIOS Setup
Starting the BIOS Setup
►
Restart the device (switching On/Off or warm boot).
►
Press the function key F2 .
If a password has been assigned:
i
►
Enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator or contact our
Hotline/Service Desk.
Operating BIOS Setup
►
Use the cursor key
►
Press the Enter key.
The menu is displayed on the screen.
►
Use the cursor key
►
Press the Enter key to confirm your selection.
►
Press the ESC key to exit the selected menu.
►
Note the changed entries.
Exiting BIOS Setup
To exit BIOS Setup, select the Exit menu and Exit Saving Changes or Exit Discarding Changes from the
menu.
24
or
to select the menu you wish to access to make changes.
or
to select the field you wish to change.
Fujitsu Technology Solutions