Preparation For Use; Unpacking And Checking The Delivery; Steps For Initial Setup - Fujitsu ESPRIMO Q900 Operating Manual

Preparation for use

!
Please observe the safety information in the "Important notes" chapter.

Unpacking and checking the delivery

It is recommended not to throw away the original packaging material! It may be required for
reshipment at some later date.
► Unpack all the individual parts.
► Check the delivery for damage incurred during transportation.
► Check whether the delivery agrees with the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery note, notify your local
sales outlet immediately.

Steps for initial setup

Only a few steps are necessary to put your new device into operation for the first time:
● Select location for device and set up device
● Connect the monitor, mouse and keyboard
● Check the voltage at the mains outlet and connect the device to an electrical outlet
● Switch the device on
You will learn more about the individual steps in the following sections.
External devices
If you have received other devices in addition to your device (e.g. a printer or a modem),
i
do not connect these until after the initial installation. The following sections contain a
description of how to connect these external devices.
Fujitsu Technology Solutions 7