Table of Contents
Advertisement
NETWORK SETUP
Interface
1.
From the Setup menu, select the
<Network (
2.
Click <Interface>.
3.
Set the <Interface> and <IPv6 Setup>
as necessary.
IP type : Select an IP connection
type.
-
Manual : Specify the IP address,
Subnet Mask, Gateway, DNS1,
and DNS2.
-
DHCP : Specify the DNS1 and DNS2.
-
PPPoE : Specify the DNS1, DNS2, ID and password.
If you set it to <Manual>, you should specify the IP, Subnet Mask, Gateway, DNS 1 & 2 manually.
MAC address : Shows the MAC address.
IP address : Displays the current IP address.
Subnet mask : Displays the <Subnet Mask> for the set IP.
Gateway : Displays the <Gateway> for the set IP.
DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
IPv6 use : Specify the use of IPv6.
IPv6 address : Obtains the IPv6 address to access the IPv6 network.
4.
When done, click [Apply (
)> tab.
)].
English _43
Advertisement
Table of Contents
