Table of Contents
Advertisement
-
Sender : Enter the address of the email sender. If the sender address is incor-
rect, the email from the sender may be classified as SPAM by the email server
and thus may not be sent.
-
Subject : Enter a subject for your email.
-
Body : Provide the text for the massage. Attach the alarm images to the email
that you are preparing.
4.
When done, click [Apply (
Alarm Input
You can set the alarm input type, activation time, and operation mode.
1.
From the Setup menu, select the
<Event (
)> tab.
2.
Click <Alarm input>.
3.
Specify an input device.
Type
-
Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
-
Normal Close : It is normally
closed, but if it is open, an alarm will be
triggered.
4.
Specify the <Activation time>.
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
5.
Specify an operation that will perform if an alarm occurs.
Output duration : Specify the alarm output time in the alarm input setup.
E-mail Sending : Specify the use of email transfer in the alarm input setup.
6.
When done, click [Apply (
)].
)].
English _49
Advertisement
Table of Contents
