Table of Contents
Advertisement
4.
Specify the details of the selected codec including resolution and frame rate.
Resolution : Set the video size of the MPEG4, H.264, and MJPEG files.
Framerate : Specify the frame rate.
Compression : Specify the compression rate of the video.
Bitrate control : You can select one from constant bit rate and variable bit rate for
compression. Constant bit rate (CBR) varies the video quality and fixes network
transfer bit rate, while variable bit rate emphasizes the quality by varying network
transfer bit rate.
Target bitrate : Specify the bit rate at which you will transfer the video.
You can enter a value between 512kbps and 5120kbps. The greater the value
is, the better the quality becomes but the network traffic is crowded accordingly,
causing disconnected network.
Encoding priority : You can set the video transfer method to Framerate or
Compression.
GOP size : Select a GOP size between 1 and 15.
Profile : The H.264 profiling method is fixed to <High>.
Entropy coding : Reduce the possible compression loss due to encoding.
CABAC (Context-Adaptive Binary Arithmetic CABAC) shows a less compression
loss but a lower frame rate than CAVLC (Context-Adaptive Variable Length Cod-
ing).
Multicast (VNP) : Specify the use of the VNP protocol.
-
IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network.
-
Port : Specify the video communication port.
-
TTL : Set the TTL for the VNP packet.
Multicast (RTP) : Specify the use of the RTP protocol.
-
IPv4 : Enter an IPv4 address with which you can connect to the IPv4 network.
-
Port : Specify the video communication port.
-
TTL : You can set the TTL for the RTP packet.
What is GOP size?
GOP (Group of Pictures) is a set of video frames for MPEG4 and H.264 format
compression, indicating a collection of frames from the initial I-Frame (key frame) to the
next I-Frame. GOP consists of 2 kinds of frames: I-Frame and P-Frame.
I-Frame is the basic frame for the compression, also known as Key Frame, which
contains one complete image data. P-Frame contains only the data that has changed
from the preceding I-Frame.
You can set between 1 and 15 for the MPEG4 and H.264 CODEC.
English _41
Advertisement
Table of Contents
