Table of Contents
Advertisement
installation & connection
INSTALLATION (SND-1010)
Precautions before installation
Ensure you read out the following instructions before installing the camera:
Select an installation site (ceiling or wall) that can endure at least 5 times of the camera
weight.
Stuck-in or peeled-off cables can cause damage to the product or a fire.
For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
Installing the camera
1.
Hold down the lock lever on the bottom
of the camera while removing the cover
with the other hand. Removing the cover
reveals the main unit.
2.
Hold down the unlock lever in the arrow direction
while turning the main unit in the <UNLOCK> direc-
tion to remove the bracket.
If this doesn't work, use the hole on the bottom
of the bracket to turn the bracket in the <LOCK>
direction.
3.
Use the provided screws (x3) to secure the bracket to a desired position (ceiling or
wall).
M
Ensure that the <CAMERA FRONT> label on the bracket faces the direction for camera
monitoring.
4.
Arrange the cables through the bracket to the ceiling
or wall.
Press hard the ceiling cover down to remove it before
you can arrange the cables through the bracket to
the ceiling. If you do not intend to install the camera
on the ceiling, use the opposite empty area to the
<CAMERA FRONT> label for this purpose.
18_ installation & connection
Advertisement
Table of Contents
