Table of Contents
Advertisement
appendix
PROBLEM
No JPEG file is transferred via
e-mail on occurrence of intelligent
video analysis event of camera
even when the <IV analysis
function> is set to <Enable>.
Can <Set Rules> be configured
even when the <IV analysis
function> is set to <Disable>?
No signal is found at the Alarm
Output port even when an
intelligent video analysis event is
generated.
62_ appendix
Verify the settings in the following sequence:
A. Check <Data & Time> settings.
B. The <IV analysis function> should be set to <Enable>.
C. Alarm Video Transmission must be enabled.
Yes, it can be. You can set rules for events despite of the intelligent
video analysis setting.
Check alarm output port settings.
SOLUTION
Advertisement
Table of Contents
