Table of Contents
Advertisement
setup screen
Video Setup
1.
From the Setup menu, select the
<Video (
2.
Click <Video Setup>.
3.
Select a <Video Source> mode.
Flip mode : Turn upside down the
image that is captured by the
camera.
Mirror mode : Flip horizontal the
image that is captured by the
camera.
Brightness : Adjust the brightness
of the video screen. You can adjust
between 1 and 255 in 255 levels; the
higher the number is, the brighter the
screen becomes.
Sharpness : You can adjust the sharpness of the camera video. You can adjust
between 1 and 30 in 30 levels; the higher the number is, the sharper the outline of
the image becomes.
Contrast : Adjust the contrast of the image. You can adjust between 1 and 255
in 255 levels; the higher the number is, the higher the contrast of the image
becomes.
Flickerless : This is for preventing a flickering screen that is caused by a mismatch
between the vertical sync frequency and the flicker frequency of the lighting.
SensUP : If the image is not adequately bright in a low-contrast scene using the
AGC function , you can use a lower shutter speed to secure enough quantity of
light.
Auto W/B : If set to ON, the white balance will be adjusted automatically accord-
ing to the lighting conditions. If set to OFF, the menu items of R-GAIN and B-GAIN
will be active while the white balance will be fixed according to custom settings.
AGC : If set to ON, the gain value will increase automatically in a low-contrast
scene.
Limit AGC : This will be active if AGC is set to ON, which will limit the gain value to
the upper limit that you specified.
4.
When done, click [Apply (
42_ setup screen
)> tab.
)].
Advertisement
Table of Contents
