Table of Contents
Advertisement
network connection and setup
BUTTONS USED IN IP INSTALLER
Item
a
Device Name
b
Mode
c
MAC(Ethernet)
Address
d
IP Address
e
Protocol
f
UPnP Status
26_ network connection and setup
Model name of the connected camera.
Click the column to sort the list by model name.
However, search will be stopped if clicked during the search.
Displays either <Static> or <Dynamic> for the current network connection
status.
Ethernet address for the connected camera.
Click the column to sort the list by Ethernet address.
However, search will be stopped if clicked during the search.
IP address.
Click the column to sort the list by IP address.
However, search will be stopped if clicked during the search.
The factory default is "192.168.1.100".
Network setting for the camera.
The factory default is "IPv4".
Cameras with the IPv6 setting will be displayed "IPv6".
This function is not currently implemented.
Description
Advertisement
Table of Contents
