Preparation; Attaching The Stand Unit - Sharp LC-40LX360H-BK Operation Manual

Preparation

Attaching the stand unit

• Before attaching (or detaching) the stand, unplug the AC power cord from the AC power outlet.
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
H LC-40LX360H-BK/LC-40LX360H-WH
Confirm that there are screws with the stand unit.
1
( Four screws)
Screws A (g2)
Place the TV set on the soft platform.
2
Soft cushion
According to the direction of the arrow, place
3
the base on the whole machine. (while
holding the base to avoid it falling over).
Soft cushion
LX360H_en_ID6-201400313.indd 7
Screws B (g2)
• When installing the stand, you need to put your TV on a flat
surface. Before that, put a soft cushion on the surface.
• To detach the stand unit, perform the steps in reverse
order.
• The angle of the stand is not adjustable.
• A screwdriver is not supplied with this product.
• During installation, please be careful to avoid getting your
hand trapped between the TV bottom and the floor.
Screws B
Screws A
Screws B
Insert the four screws into the four holes on
4
the back of the TV, and tighten them.
NOTE
7
2014/3/15 10:12:40