Table of Contents
Advertisement
Preparation
Turning the TV on/off
POWER
button
POWER
button
Turning on/off the power
w To turn on the power
Press POWER on the TV. (After several seconds, an
image appears with sound.)
NOTE
• Wait more than five seconds until you press POWER on
the TV after inserting the power plug.
w To turn off the power
Switch it off by pressing POWER on the TV.
Standby mode
w To standby mode
If the TV is switched on, you can switch it to standby
by pressing POWER on the remote control.
w Switching on from standby
From standby, press POWER on the remote control.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• A small amount of electric power is still consumed even the
TV is in standby mode or switch off by pressing POWER
on the TV.
LX360H_en_ID6-201400313.indd 15
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
Confirm the following before turning on the
power
• Is the antenna cable connected?
• Is the AC cord plugged in?
Press POWER on the TV.
1
• The initial auto installation wizard appears.
Press a / b to select the desired language,
2
and then press ENTER.
Press a / b to select "HOME" or "STORE",
3
and then press ENTER.
• HOME: "STANDARD" will be the default value for the "AV
mode" setting.
• STORE: "DYNAMIC (FIXED)" will be the default value for
the "AV mode" setting. If the "AV mode" is changed, the
TV will automatically switch back to "DYNAMIC (FIXED)"
when there is no further change to TV setting for 30
minutes. When selecting "STORE", press a /b to select
"Yes"or "No" to confirm.
Press a / b to select "DTV"、 "ATV" or
4
"DTV+ATV" and then press ENTER.
The TV searches for, sorts and stores all
5
the receivable TV stations according to their
settings and the connected antenna.
• To abort the initial auto installation in progress,
press MENU.
NOTE
• HOME mode: Settings are optimised for normal home viewing and
energy efficiency.
• STORE mode: Settings are designed for maximum impact in retail
store displays.
• To change the "STORE" mode to "HOME" mode, please refer to
page 24 to reset the unit.
• If you turn off the power on the TV after performing step 4, the
initial auto installation wizard does not appear. The auto installation
function allows you to execute the auto installation again from the
"Programme setup" menu. (See page 17.)
15
2014/3/15 10:12:48
Hide quick links:
Advertisement
Table of Contents
