Programme Edit - Sharp LC-40LX360H-BK Operation Manual

Watching TV
w Manual adjust
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup".
2
Press a / b to select "Analogue setting", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 22 for setting a password.
Press a / b to select "Manual adjust", and
4
then press ENTER.
Press a / b to select your desired item, and
5
then press c / d to adjust the settings.
Item
Storage to Save programme to your desired
[1~99] channel number. Press R to save.
Sound system
Select the optimum sound system
(Broadcasting system) to receive.
(B/G, D/K, I, M)
Press R to save.
Colour system Select the optimum colour system to
receive. (PAL, SECAM, NTSC)
Press R to save.
Current CH Select the channel you want to edit.
• Selected channel will be automatically
refl ected in the background.
Search Start searching from current channel.
• Instead of pressing
frequency, you can set by directly
entering the frequency number of the
channel with 0 — 9.
Press R to save.
Fine-tune Tune the frequency of the stored channel
to your desired position.
• Adjust while checking the background
picture as a reference.
Press R to save.
NOTE
• The frequency shown below the On-Screen Display shows
the real-time frequency of the displayed channel.
18
LX360H_en_ID6-201400313.indd 18
Description
c / d
to adjust the

Programme edit

Use this menu to set up a channel individually.
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup" .
2
Press a / b to select "Programme edit", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 22 for setting a password.
Press a / b to select the desire programme.
4
w Erase
Channels can be erased individually.
Press 1 to erase the selected channel.
w Label
You can change individual channel names.
Press 2 to start labelling.Press a / b / c / d to select a
character, and then press 2 again or ENTER to save.
•
Maximum 5 alphanumerics can be input.
w Sort
Channel positions can be sorted freely.
Press 3 to select the channel you want to move.
Press a / b to move it to the desired position, and
then press 3 again or ENTER to save.
w Skip
Channels with "Skip" set to "On" are passed over
when using CH even if selected while watching
/
r s
the image from the TV.
Press 4 to skip the selected channel. Press 4 again to
cancel the skip.
w Lock
You can block the viewing of any selected channel.
Press 5 to lock the selected channel. Press 5 again to
unlock the locked channel.
•
If a channel is set to "Lock",the image and sound of the
channel is blocked when you select the channel.
•
See page 22 for setting a password.
2014/3/15 10:12:49