Watching TV
Audio
Audio
AV mode
See page 19.
Sound adjust
You can adjust the audio of the selected AV mode.
Press MENU and the MENU screen displays.
1
Press c / d to select "Audio".
2
Press a / b to select "Sound adjust", and then
3
press ENTER.
Selected item
c button
Treble
For weaker treble
Bass
For weaker bass
Balance
Decrease audio
from the right
speaker
Surround
The surround function produces a surround effect from
the speakers.
Press MENU and the MENU screen displays.
1
Press c / d to select "Audio".
2
Press a / b to select "Surround", and then
3
press ENTER.
Press a / b to select "On" or "Off".
4
LX360H_en_ID6-201400313.indd 21
Reset all audio adjustment items to the factory preset
values.
AV Mode
Sound adjust
Surround
Reset
d button
For stronger treble
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
For stronger bass
no programme signals, such as the end of a broadcast
Decrease audio
day.
from the left speaker
• "Disable" is the factory preset value.
• When a TV programme finishes, and the TV receives signal
Reset
Press MENU and the MENU screen displays.
1
Press c / d to select "Audio".
2
Press a / b to select "Reset", and then press
3
ENTER.
Press a / b to select "Yes", and then press
4
ENTER.
ECO
ECO
No signal off
Press MENU and the MENU screen displays.
1
Press c / d to select "ECO".
2
Press a / b to select "No signal off", and then
3
press ENTER.
Press a / b to select "Enable" or "Disable",
4
and then press ENTER.
Press a / b to select "Yes" or "No", and then
5
press ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
input, this function may not operate.
No signal off
No operation off
21
2014/3/15 10:12:50