No Operation Off; Watching Tv (Continued); Setup; Child Lock - Sharp LC-40LX360H-BK Operation Manual

Watching TV

No operation off

You can set the TV to automatically power off when no
TV operation is performed for 30 minutes or more than
3 hours.
Press MENU and the MENU screen displays.
1
Press c / d to select "ECO".
2
Press a / b to select "No operation off", and
3
then press ENTER.
Press a / b to select "30 min.", "3 hr." or
4
"Disable", and then press ENTER.
Press a / b to select "Yes" or "No", and then
5
press ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• "Disable" is the factory preset value.

Setup

Setup

Child lock

Allows you to use a password to protect certain
settings from being accidentally changed.
w Change password
Register a 4-digit password number to use the Child
Lock function.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Child lock", and then
3
press ENTER.
• If you already set the password, enter it here.
Press a / b to select "Change password", and
4
then press ENTER.
Enter the 4-digit number as a password using
5
0 - 9.
22
LX360H_en_ID6-201400313.indd 22
• To view a locked channel (Lock setting in Programme
w Clear password
Allows you to clear your password.
w Parental rating
Child lock
This function allows TV channels to be restricted.
Input label
HDMI auto view
It prevents children from watching violent or sexual
Link operation
Auto wide scenes that may be considered inappropriate.
4 : 3 mode
Quick start
Language（語音）
Digital setup
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
• If you forget your password, perform "MENU"
Enter the 4-digit number as in step 5 to
6
confirm.
NOTE
setup "Programme edit" is set to "On"), you must enter
a password. (See this page.) When you select a locked
channel, a password prompt message pops up. Press
ENTER to display the password input window.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Child lock", and then
3
press ENTER.
• If you already set the password, enter it here.
Press a / b to select "Clear password".
4
Press c / d to select "Yes", and then press
5
ENTER to delete the password.
Reapt steps 1-6 in "Change password".
1
Press a / b to select "Parental rating", and
2
then press ENTER.
Press a / b to select your desired rating, and
3
then press ENTER.
Selected item Description
None Cancel the blocking.
Age 4-18 Select desired age to block.
years (Example) If age 14 is selected,
programmes rated for ages of 15 or more
are blocked.
NOTE
by inputting the correct password, turn power off and then
on again.
"Child lock". When the password input OSD displays, enter
"3001" to clear the password.
"Setup"
2014/3/15 10:12:51