Watching Tv; Programme Setup; Auto Installation; Digital Setting - Sharp LC-40LX360H-BK Operation Manual

Watching TV

Programme setup

Programme setup

Auto installation

You can run auto installation again, even after setting
up the preset channels.
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup" .
2
Press a / b to select "Auto installation", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 22 for setting a password.
Press a / b to select the desired language,
4
and then press ENTER.
Press a / b to select "DTV"、 "ATV" or
5
"DTV + ATV" and then press ENTER.
The TV searches for, sorts and stores all the
6
receivable TV stations according to their settings and
the connected antenna.
• To abort the initial auto installation in progress,
press MENU.

Digital setting

You can set some DTV channel items manually.
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup".
2
Press a / b to select "Digital setting", and then
3
press ENTER.
If you have already set the password, enter it
here.
• See page 22 for setting a password.
Press a / b to select the desired menu item,
4
and then press ENTER.
w Auto search
Use this menu to add new DTV services automatically
after auto installation has been completed.
Press MENU and the MENU screen displays.
1
LX360H_en_ID6-201400313.indd 17
Auto installation
Digital setting

Analogue setting

Programme edit
Press c / d to select "Programme setup".
2
Press a / b to select "Digital setting", and then
3
press ENTER.
If you have already set the password, enter it
here.
• See page 22 for setting a password.
Press a / b to select "Auto search", and then
4
press ENTER.
You do not need to do anything during the
auto search. Press MENU to exit.
w Manual search
Add new services within a specified frequency band.
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup" .
2
Press a / b to select "Digital setting", and then
3
press ENTER.
If you have already set the password, enter it
here.
• See page 22 for setting a password.
Press a / b to select "Manual search", and
4
then press ENTER.
Press c / d to select the frequency and then
5
press ENTER.
w Signal information
See page 16 for signal information.
w 5V Antenna power
See page 16 for antenna power.
Analogue setting
You can set some ATV channel items manually.
w Auto search
Use this menu to add new ATV services automatically
after auto installation has been completed.
Press MENU and the MENU screen displays.
1
Press c / d to select "Programme setup".
2
Press a / b to select "Analogue setting", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 22 for setting a password.
Press a / b to select "Auto search", and then
4
press ENTER.
You do not need to do anything during the
auto search. Press MENU to exit.
17
2014/3/15 10:12:49