Power Control; Power Control; No Signal Off; No Operation Off - Sharp LC-26DA5U Operation Manual

Basic adjustment settings

Power control

Power control setting allows you to save energy.

No signal off

When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power Control".
3
Press a/b to select "No Signal Off", and
then press ENTER.
4
Press c/d to select "Enable", and then
press ENTER.
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
• When a TV program finishes, this function may not operate.

No operation off

When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
1
Repeat steps 1 and 2 in No signal off.
2
Press a/b to select "No Operation Off", and
then press ENTER.
3
Press c/d to select "Enable", and then
press ENTER.
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
24
LC-26/32DA5U(E)-21-24
Disable
24 05.7.15, 8:18 AM