Energy Conservation Settings; Auto Power-Off At A Designated Time; Auto Power-Off After The End Of Broadcast; Auto Power-Off When There Are No Operations Performed - Sharp LC-32G100H Operation Manual

Watching TV

Energy conservation settings

Auto power-off at a designated time

This function is conveniently used when, for instance,
going to bed while watching TV.
Press SLEEP.
1
• Remaining time displays when sleep timer has
been set.
Sleep Timer: Remain 2 hr. 00 min.
Each time you press SLEEP, the remaining
2
time switches as shown below.
Off
2 hr. 30 min.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
26
0 hr. 30 min. 1 hr. 00 min.
2 hr. 00 min. 1 hr. 30 min.

Auto power-off after the end of broadcast

You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals, such as the end of a broadcast
day.
Press MENU and the MENU screen displays.
1
Press c / d to select "Power Control".
2
Press a / b to select "No Signal Off", and then
3
press ENTER.
Press c / d to select "Enable", and then press
4
ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• "Disable" is the factory preset value.
• When a TV programme fi nishes, and the TV receives signal
input, this function may not operate.
Auto power-off when there are no
operations performed
You can set the TV to automatically power off when no
TV operation is performed for more than an hour.
Press MENU and the MENU screen displays.
1
Press c / d to select "Power Control".
2
Press a / b to select "No Operation Off", and
3
then press ENTER.
Press a / b to select "30 min.", "3 hr." or
4
"Disable".
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• "Disable" is the factory preset value.