Bridge Element - GE JP938 Technical Service Manual

Heating Element Systems
The Haliant Surface Element consists of a ribbon-
type resistance wire attached to the support insula-
tion with molded ceramic fiber walls in a corrosion-
protected metal dish.
These circular heating elements come in the three
sizes listed below.
Ribbon Heating
Element
Supporting
Insulation
Ceramic
Fiber
Molded
Hot Light
Wall
6" 240 Volt-1200 Watts
7" 240 Volt-1500 Watts
Hot
9" Ribbon Heating
Light
Element
4
4
Supporting
Insulation
Ceramic Fiber
Molded Wall
6" Ribbon Heating
Element
9" Dual Unit 240 Volt 2500 Watts
(6"-1000W., 9"-1500W)
GEA00798

Bridge Element

The Bridge Element is made up of two 7-in.,
1800 watt elements plus an 800 watt element
between the two 7-in. elements. The elements
consist of a ribbon-type resistance wire attached
to support insulation with molded ceramic walls.
The digital control on the electronic models (or
the infinite heat switches on the electric models)
regulates the 7-in. units independently of each
other, or in combination when the bridge operat-
ing mode (or switch) is selected. The bridge and
the left front element are regulated by the same
controls.
7"-1800 Watt
Elements
Molded
Ceramic
Wall
RTD
– 8 –
RTD
800 Watt
Bridge
Element
GEA00902