Installation - GE JP938 Technical Service Manual

Counter Installation Dimensions (in inches)
13" MAX.
depth
30" MIN. to
unprotected
cabinet
1-3/4" to
rear wall
1-3/4" MIN.
clearance to
side wall
from cut-out
Electrical junction
box 16" MIN.
below countertop
Dimensions (in inches)
Overall
Model W
JP968WC/CC/BC 36 20-3/8
JP960TC/CC/BC 36 20-3/8
JP938WC/CC/BC 29-3/4 20-7/8
JP930TC/CC/BC 29-3/4 20-7/8
JP350TC/WC/CC/BC 29-3/4 20-7/8
JP340WC/BC 29-3/4 20-7/8
*Depth of unit at conduit connection location (rear) is 6-1/4" on models JP968/938
and 4-5/8" on models JP960/930/350/340.
36-in. and 30-in. Cooktops
Refer to installation instructions. Installation
requires an 18-in. minimum distance from
cooktop to adjacent overhead cabinets. Units are
furnished with a 48-in. flexible armored cable.
Cooktop installation requires a 5-in. free area
between the bottom of the cooktop and any
combustible material, such as shelving. This 5-in.
area is not required when installing a wall oven
underneath the cooktop.
The 36-in. cooktops are approved for use over
GE 30-in. single wall ovens only. The 30-in.

Installation

1-1/2" MIN.
18" MIN.
clearance to
to cabinet
side wall
from cut-out
Cut should not interfere
with cabinet structure
at front
Cutout
D A E F
3-1/4* 33-7/8 19-1/8
3-1/4* 33-7/8 19-1/8
3-1/4* 28-1/2 19-5/8
3-1/4* 28-1/2 19-5/8
3-1/4* 28-1/2 19-5/8
3-1/4* 28-1/2 19-5/8
GEA00792
Cooktop Dimensions (in inches)
G
Required
Stainless Steel Cooktop Dimensions (in inches)
To Edge
of Front
Counter
(Min.)
G Model
2-1/2 JP968SC
JP960SC
2-1/2
JP938SC
2-1/2
JP930SC
2-1/2
JP350SC
2-1/2
*Depth of unit at conduit connection location (rear) is 6-1/4" on models JP968/938
2-1/2
and 4-5/8" on models JP960/930/350.
cooktops are approved for use over select GE
27-in. and GE 30-in. single wall ovens.
Note: If installing with a GE Profile Performance™
or GE Profile™ Telescopic Downdraft System,
consult both cooktop and downdraft installation
instructions packed with the products before
installing. Cooktop electric supply may need to be
rerouted to install the downdraft ventilation.
Note: Consult the cabinet and countertop
manufacturer's specs for flush-mount installation
prior to installing.
– 3 –
D
W
Cooktop
F
E
GEA00791
Cutout
Overall
W D A E
36-1/8 21 3-1/4* 33-7/8
36-1/8 21 3-1/4* 33-7/8
29-7/8 21-1/2 3-1/4* 28-1/2
29-7/8 21-1/2 3-1/4* 28-1/2
29-7/8 21-1/2 3-1/4* 28-1/2
A
To Edge
of Front
Counter
(Min.)
F G
19-1/8 2-1/2
19-1/8 2-1/2
19-5/8 2-1/2
19-5/8 2-1/2
19-5/8 2-1/2
GEA00793