Bridge Surface Element; Dual Surface Element; Tri-Ring Surface Element - GE PP962 Owner's Manual

Using the surface elements.
The dual surface element has 2 cooking sizes to select from so you can match the size of the element to the size of the cookware you are using.
Small
Large
surface
surface
element
element
setting
setting
OFF
The Tri-Ring surface element offers 3 cooking areas to match the size of the cookware you are using.
8
Dual Surface Element with Selector Knob
To use the large surface element, turn
the SELECTOR knob to
turn the control knob to the desired
setting. The element will heat the entire
area contained by the larger circle.
Dual Surface Element without Selector Knob
To use the small surface element, turn the
control knob to the settings.
To use the large surface element, turn the
control knob to the settings.
Bridge Surface Element with Selector Knob
You can create an oblong heated area by using
the left rear element in addition to the front
element bridge combination.
Make sure the pan rests flat on the glass
cooktop.
When the SELECTOR knob points to
the control knob controls both the left
front surface element and the bridge area.
Bridge Surface Element without Selector Knob
Make sure the pan rests flat on the glass
cooktop.
To use the bridge element, push and
turn the control knob to
the desired settings.
Tri-Ring Surface Element with Selector Knob
To use the largest cooking area, turn the
SELECTOR knob to . Push and turn
the control knob to the desired setting.
To use the medium cooking area, turn
the SELECTOR knob to
Push down and turn the control knob to
the desired setting.
(on some models)
To use the small surface element, turn
the SELECTOR knob to
. Push in and
turn the control knob to the desired
setting. The element will only heat
the area inside the smaller circle.
(on some models)
Choose pans that match the
circle/bridge area as closely as possible.
When the SELECTOR knob points to
the control knob controls the left front
surface element only.
,
Choose pans that match the
circle/bridge area as closely as possible.
To use the left front surface element only,
, stopping at push and turn the control knob to
stopping at the desired settings.
To use the smallest cooking area, turn
the SELECTOR knob to . Push and turn
the control knob to the desired setting.
This will activate only the smallest inside
heating area.
.
. Push in and
(on some models)
(on some models)
(on some models)
,
,