Table of Contents
Advertisement
Canon BU Series PTZ Cameras
Step 4:
BU-50H
Connect the RJ-45 to DB-9 adapter to the CONTROL port on the back of the pan/tilt head. Connect the
power and control cables that were supplied with the BU-50H camera into the appropriate ports on the
camera and pan/tilt head. Refer to the Canon manual for additional details on cable placement.
Connect the AC cord to the back of the pan/tilt head.
Step 5:
After completing the installation of the camera, connect the CAT-5 cabling to the back of the Vaddio joystick
controller. Follow the programming instructions provided with the Vaddio joystick controller in order for it to
recognize the Canon BU series camera.
CARE AND CLEANING
•
Do not attempt to take the products in these systems apart. There are no user-serviceable components.
•
Keep these devices away from food and liquid, and do not spill liquids on the products
•
For smears or smudges on the lens, wipe with a clean, soft cloth. Do not use any abrasive chemicals on
the camera body at any time.
Part Numbers
Vaddio/Canon BU Series Camera System
System Part Numbers
999-4100-000 NTSC Vaddio/Canon BU-45H Outdoor PTZ Camera System
999-4100-001 PAL Vaddio/Canon BU-45H Outdoor PTZ Camera System
System Part Numbers
999-4150-000 NTSC Vaddio/Canon BU-50H Indoor PTZ Camera System
999-4150-001 PAL Vaddio/Canon BU-50H Indoor PTZ Camera System
GENERAL SPECIFICATIONS
BU Series Camera Basic Specifications
Signal Systems
Video Resolutions
Lens
Image Sensors
Canon BU-Series PTZ Camera Installation and User Guide 341-909 Rev. A
NTSC or PAL
1080i 59.94/50 (HD-SDI) and 480i/576i (Composite SD)
20x Optical
3 - 1.67 Megapixel CCDs
Page 6 of 8
Advertisement
Table of Contents
