Record Event Video Only; Per Camera Configuration - Okina ECO H.264 User Manual

DVR User's Manual
3.5.3

Record Event Video Only

If the DVR shall start recording only when alarms are triggered, follow the
steps below:
• Enter the OSD setup menu with correct password.
• In the OSD setup menu, select <Record Setup> menu. Move the cursor to
the item <Preset Config>, and select <Event only>.
Refer to OSD Setup Manual, Section Preset Record Configuration for more
detailed information.
3.5.4

Per Camera Configuration

This function is used to set the Day / Night / Weekend PPS (Picture per
Second) and Quality for each channel. The Preset Configuration must be set
to <OFF> for accessing these schedules. The menu is displayed as below
(Record Mode: 720×240@120PPS in NTSC / 720×288@100PPS in PAL).
Cameral Select
Normal PPS
Normal Size
Event Max PPS
Event Size
Event Active
• Firstly, select a Camera for setting its record configuration. The image and
recording settings from the selected camera will be displayed on the
screen.
• Move the cursor using Direction keys and press ENTER to select an item.
• Change the value using UP / DOWN keys.
• Press ENTER to confirm the settings or ESC to abort.
• Press ESC to return to Record Setup menu.
Please note that the total normal PPS for all channels cannot exceed 120
NTSC (720×240@120PPS) / 100 PAL (720×288@100PPS). To increase one
channel's PPS, you may have to reduce others' first. Event PPS is not
restricted to this rule, since a smart event scheduler will handle the total PPS
with a correct weighting.
18
Per Camera Config
Day Night
7.5 7.5
Mid Mid
30 30
Best Best
Both Both
CH1
Weekend
7.5
Mid
30
Best
Both