Export Event Video - Okina ECO H.264 User Manual

DVR User's Manual
• Press COPY again to mark the ending point of the export video. Then the
"ezBurn" window will display as below figure. The information shown on
the window is "read only".
• Press ENTER to start the export; or, press ESC to abort.
• If there is no any exportable device connected to the DVR unit, then a
warning message will be shown on the screen, as below figure:
4.4.3

Export Event Video

To export event video, follow these steps:
• Press SEARCH and play wanted event video. To play event video, refer to
Section Searching Recorded Video.
• After entering the playback mode, press COPY. The "ezBurn" window will
display as below figure. The information shown is "read only".
• If there is no any exportable device connected to the DVR unit, a warning
message will be shown on the screen
• Press ENTER to start the export the whole event video to the connected
device; or, press ESC to abort.
28
ezBurn confirmation
Selected Device: External Device
All data on the disc will be erased.
Exported Required Size = 11 MB
Real Export Range:
From: 2008/05/07 AM10:41:13
To: 2008/05/07 AM10:41:21
Enter: YES
No exportable device detected.
Please install the target device/media
to the DVR.
Enter: Retry
ezBurn confirmation
Selected Device: External Device
All data on the disc will be erased.
Exported Required Size = 11 MB
Export Event Info:
Data Time
2008/05/07 AM10:42:35
Enter: YES
ESC: NO
ESC: Exit
Ch
13 Motion
ESC: NO
Type