Table of Contents
Advertisement
DVR User's Manual
4.5.5
Setting Preset Points
The DVR allows users to set preset positions. The amount of preset points
depends on the dome manufacturer.
Follow the steps to set preset points.
• Press a Channel key to view the corresponding camera in full screen.
• Then press DOME to enter Dome Control mode. A Hint Screen shown as
below figure displays on the screen.
• Press 2 to hide the Dome Control Hint Screen; press 2 again to toggle the
Hint Screen.
• Use Direction keys to position the dome camera to desired position.
Dome Control
• Press 1 to access the Set/Go Preset function. The Dome Preset menu is
displayed.
First Page
• Use UP / DOWN keys to select the desired preset number from the menu.
• Set the <Set Preset> of the selected preset number to <Yes>, and press
ENTER to save the position. Now the preset is set and ready to be called.
32
Hint Screen
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
FREEZE
SEQ /
: Focus Near / Far
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
Dome Preset
Index
Set Preset
1
No
2
No
3
No
4
No
5
No
6
No
7
No
Go Preset
No
No
No
No
No
No
No
Advertisement
Table of Contents
