Table of Contents
Advertisement
4.5.6
Calling Preset Points
Follow the steps to call preset points.
• Press a Channel key to view the corresponding camera in full screen.
• Then press DOME to enter Dome Control mode. Then a Hint Screen,
shown as blow figure, will display on the screen.
• Press 2 to hide the Dome Control Hint Screen; press 2 again to toggle the
Hint Screen.
• Press 1 to access the Set/Go Preset function.
First Page
• Use UP / DOWN keys to select the desired preset number from the menu.
• Set the <Go Preset> of the selected preset number to <Yes>, and press
ENTER to call the preset point.
• Now the selected dome camera rotates to the preset position
automatically.
Dome Preset
Index
Set Preset
1
No
2
No
3
No
4
No
5
No
6
No
7
No
DVR User's Manual
Go Preset
No
No
No
No
No
No
No
33
Advertisement
Table of Contents
