General System Setup; Front Panel Introduction; Led Definition - Okina ECO H.264 User Manual

DVR User's Manual
3.

General System Setup

Before operating the DVR, some general configuration should be setup first.
The following subsections will introduce function keys on the front panel and
general configuration of the DVR.
The regular displayed OSD information and its displayed positions are shown
as following figure. Title of the channel will be displayed on the top-left corner
of the window, either in full-screen mode or in spilt window mode. The current
operating mode, including Playback mode, Freeze mode and Sequence
mode, will be displayed on the bottom-left corner of the screen. The date/
time information will be display on the bottom-right corner.
3.1

Front Panel Introduction

The front panel controls enable users to control the unit and preset the
programmable functions.
3.1.1

LED Definition

The LEDs on the front panel of the DVR are described as follow.
10
Ch1
►*1
Power LED
The LED lights up when the correct power is connected to the unit.
REC LED
The LED blinks while the DVR is recording.
Alarm LED
The LED lights up when an alarm is triggered.
Network LED
The LED lights up when the DVR is connected to a network and
blinks when the data is being transferred.
2008/05/09 PM04:31:22