PAD Settings
Remote IP Address:
Sets the IP address of the device using the PAD functionality.
Remote Port:
Sets the port number used by the remote device to accept requests from the LandCell.
:
Local Port
Sets the port number used by the LandCell to accept requests from the remote device.
PAD Mode:
Select buttons to set the PAD mode of the LandCell as a Server or Client.
Pad Protocol:
Sets the data protocol of the PAD to tcp or udp data.
TCP Client Keep Alive:
PAD Log:
If enabled, a log of the data passed through the modem is saved at /tmp/intpadlog. The log will stop
saving data when full and data is lost at modem reset.
The SAVE button must be pressed for changes to take effect.
001-0003-832 Rev3
Page 46 of 59