Siemens HiPath 3000 Operating Manual page 46

Conducting calls – enhanced functions
Step by Step
> <
Service?
> <
*7=Use speed dial-
ing?
38
Dialling a system speed dialling destination with
suffix-dialling or a DID number
System speed dialling destinations can be saved in your
communication system and then dialled by means of
suffix-dialling or DDIA. These speed dialling destina-
tions let you enter an additional suffix-dialling or DID
number up to five seconds after entering the three-digit
service code. If you do not make an entry within this
timeframe, the default suffix-dialling number,
for example, "0" for the exchange, is dialled.
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the required code (3 digits, 000 - 999).
o
Within five seconds: enter the suffix-dialling or DID
number.