Siemens HiPath 3000 Operating Manual page 17

Step by Step
> <
2=external
calls only?
> <
3=internal
calls only?
> <
Divert cancelled?
or:
[
Select the menu item and confirm.
or:
[
Select the menu item and confirm.
then:
o
Enter the destination phone number.
Save the settings.
Save
a Press the On-hook key to end the process.
Deactivating call forwarding
Prerequisite:
The room monitor function is activated.
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
a Press the On-hook key briefly to end the process.
Conducting calls – the basic functions
Note:
The external code must be entered before
external phone numbers. If the service engineer
has activated DTMF DID, you can also forward
calls to these external phone numbers.
9