Siemens HiPath 3000 Operating Manual page 43

Step by Step
D
D E
Play Pattern
...
D E
Delete Name
a Press the On-hook key to end the process.
Dialling a phone number with voice dialling
E
Press and hold down the Control key and wait for the
signal tone. After the tone, say the name of the party
you wish to call.
If the name you said matches the voice pattern saved,
the handset repeats it and dials the associated number.
Listening to a voice pattern
D
Open the handset's phonebook.
E
´
Select the required voice dialling entry. This entry must
be marked as a voice dialling entry.
© G
Open the handset's phonebook menu.
or
[
Select the menu item and confirm. The voice pattern is
played back in speakerphone mode.
a Press the On-hook key to end the process.
Changing or deleting voice patterns
Once you have deleted the voice pattern, you can
record a new one.
D
Open the phonebook.
D E
Select the required voice dialling entry.
G
Open the menu.
[
Select the menu item and confirm.
a Press the On-hook key to end the process.
Conducting calls – enhanced functions
Note:
The telephone directory entry is maintained
even after the corresponding voice pattern is
deleted.
35