Locking/Unlocking The Handset - Siemens HiPath 3000 Operating Manual

Step by Step
> <
Changeover on?
> <
Changeover off?

Locking/unlocking the handset

You can lock your handset to prevent external dialling
and programming, thereby preventing unauthorised
use in your absence, for example.
Prerequisite: You have defined a personal code or use
the default code "00000".
Locking the handset
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
o
Enter the PIN code (5 digits, default "00000").
a Press the On-hook key to end the process.
Unlocking the handset
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
o
Enter the PIN code (5 digits, default "00000").
a Press the On-hook key to end the process.
Note:
Even though it is locked, you can still use your
handset to answer external calls and make inter-
nal calls. When an external connection is estab-
lished, the following message appears on the
display "Telephone Lock Active".
Your handset can also be locked from a central
station ( page 100).
Telephone blocking
101