Adding Pci Cards - Supero 1017C-TF User Manual

S S
UPER ERVER 1017C-TF User's Manual
5-6

Adding PCI Cards

PCI Expansion Slots
One riser card is used to support a PCI expansion (add-on) card in the system.
The SC111LT-330CB chassis can accommodate one standard size (full height full
length) PCI expansion card. When viewed from the chassis front, the card installs
to the left rear of the system.
PCI Card Installation
Before installing a PCI add-on card, make sure it is supported by the riser card.
Begin by releasing the locking tab that corresponds to the slot you wish to populate.
Insert the expansion card into the riser card by pushing down with your thumbs
evenly on both sides of the card.
PCI Slot/Card Confi gurations
Riser Card
CSE-RR1U-E8 (pre-installed)
Expansion card supported
1x PCI-E 2.0 x8 card
5-10