Advanced Setup Confi Gurations - Supero 1017C-TF User Manual

S S
UPER ERVER 1017C-TF User's Manual
7-3 Advanced Setup Confi gurations
Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu
items:
Main Advanced Event Logs
Boot Feature
Processor & Clock Options
Chipset Configuration
IDE/SATA Configuration
PCIe/PCI/PnP Configuration
Super IO Configuration
Remote Access Configuration
Hardware Health Configuration
ACPI Configuration
Trusted Computing Configuration
BOOT Feature
Quiet Boot
This option allows the bootup screen options to be modifi ed between POST mes-
sages or the OEM logo. Select Disabled to display the POST messages. Select
Enabled to display the OEM logo instead of the normal POST messages. The op-
tions are Enabled and Disabled.
AddOn ROM Display Mode
This sets the display mode for Option ROM. The options are Force BIOS and
Keep Current.
Bootup Num-Lock
This feature selects the Power-on state for Numlock key. The options are Off
and On.
Wait For 'F1' If Error
This forces the system to wait until the 'F1' key is pressed if an error occurs. The
options are Disabled and Enabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt
BIOS SETUP UTILTY
IPMI Boot Security
Version x.xx.xxxx. Copyright (C) 2010 American Megatrends, Inc.
Exit
4-4
System Boot Feature
Setting.
: Select Screen
: Select Item
Enter: Select
+/- : Change Opt.
F1 : General Help
F2 : Previous Values
F3 : Optimized Defaults
F4 : Save & Exit
ESC : Exit