Security Settings - Supero 1017C-TF User Manual

Superserver
Table of Contents

Advertisement

7-7

Security Settings

Main
Advanced
Event Logs
Password Description
If ONLY the administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password must be 3 to 20 characters long.
Access Level
Administrator Password
User Password
Boot Sector Virus Protection
If the Administrator password is defi ned ONLY - this controls access to the
BIOS setup ONLY.
If the User's password is defi ned ONLY - this password will need to be entered
during each system startup or boot, and will also have Administrator rights in
the setup.
Passwords must be at least 3 and up to 20 characters long.
Administrator Password
Press Enter to create a new, or change an existing Administrator password.
User Password:
Press Enter to create a new, or change an existing User password.
Boot Sector Virus Protection
When Enabled, the BIOS displays a warning when any program (or virus) issues a
Disk Format command or attempts to write to the boot sector of the hard disk drive.
The options are Enabled and Disabled.
BIOS SETUP UTILTY
IPMI
Boot
Security
Administrat
[Disabled]
Version x.xx.xxxx. Copyright (C) 2010 American Megatrends, Inc.
4-19
Exit
Set Setup Administrator
Pasword.
Enter:
+/- :
F1 :
F2 :
F3 :
F4 :
ESC :
Chapter 7: BIOS
:
Select Screen
:
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Exit
Exit

Advertisement

Table of Contents
loading

Table of Contents