Receiving A Call; Hanging Up - Radio Shack 43-3703 Owner's Manual

From the Handset Speakerphone
1. Remove the handset from the base. Ô
2. Press
SPEAKER
3. Listen for the dial tone.
4. Dial the number.
5. When the other party answers, talk into
the microphone.
R
ECEIVING A CALL
1. Remove the handset from the base. (If
Auto Talk is on, the phone will
automatically answer the call when you
pick it up.)
2. Press
TALK/FLASH
corresponding soft key
). Ô
LINE2
OR
If the handset is off the base, press
TALK/FLASH
( or
LINE1 LINE2
on, you can also press any number key.
H U
ANGING
From the handset, press
handset to the base.
From the handset speakerphone, press
or return the handset to the base.
END
Switching to the Handset
Speakerphone During a Call
To switch a normal call to the
speakerphone, press
handset. To switch from a speakerphone
call to a normal call, press
.
or the
(LINE1
or the correspond soft key
). If Any Key Answer is
P
or return the
END
on the
SPEAKER
SPEAKER
From the Handset
Speakerphone
• The handset microphone
is located at the bottom
of the handset.
• For best performance,
use the speaker phone
in a quiet room and let
the caller finish speaking
before you speak. If you
or the other party has
or difficulty hearing, adjust
the speaker volume.

Receiving a call

• To have the phone
select Line1 or Line2
instead of a free line, set
the default telephone
line (see "Selecting a
Telephone Line" on
page 19).
.
Ô Ô
NOTES
29