Table of Contents
Advertisement
Ô
NOTES
Call Waiting
You must subscribe through
your local telephone
company to receive Call
Waiting or Caller ID on call
waiting service.
Placing a Call on Hold
• You can place a call on
hold for 15 minutes.
When 15 minutes has
passed, the call is
disconnected, and the
phone returns to standby
mode.
• While a call is on hold,
CIDCW can not be
received.
Redialing a Call
• If the number exceeds
32 digits, only the first 32
digits are retained in
redial memory.
• If the redial memory is
empty, you will hear a
beep.
30
C
ALL
If you have Call Waiting service and a call
waiting tone sounds while you are on a call,
press
TALK/FLASH
the waiting call. There is a short pause, and
Ô
then you will hear the new caller. To return
to the original caller, press
the handset again. Ô
P
LACING A
1. During a call, press
handset. The line soft key (
LINE2
The call will be put on hold. Ô
If you leave a call on hold for more than
10 seconds, the display screen will
read Hold.
2. To talk to the caller, press
or
(
LINE1
back to the call.
R
EDIALING A
The last three phone numbers dialed can be
quickly redialed from the handset. Redial
numbers stored in the handset are
independent from each other. Ô
1. With the phone in standby mode, press
the
2. Press
scroll through the last three dialed
numbers.
3. Press
correspond soft key (
The selected number is dialed.
4. To hang up, press
W
AITING
on the handset to accept
C
ALL ON
INTCM/HOLD
) to be placed on hold will flash.
, or the correspond soft key
SPEAKER
or
). The phone will return
LINE2
C
ALL
.
REDIAL/P/
or
CID/VOL/
or
TALK/FLASH
END
on
TALK/FLASH
H
OLD
on the
or
LINE1
TALK/FLASH
to
REDIAL/P/
, or the
SPEAKER
or
).
LINE1
LINE2
.
Advertisement
Table of Contents
