Caller Id And Redial Menu Options; Using Seven-Digit Dialing; Using Call Waiting - Radio Shack 43-337 User Manual

Caller ID and Redial Menu Options

With the phone in standby, open the CID or the redial list. Find the entry you want and press
OPTIONS. Choose one of the following:
Menu option: Use it to:
Add the selected CID/redial list entry to this station's phonebook. The phone
creates a new phonebook entry, then prompts you to edit the name and
Store into PB
phone number; cordless handsets also prompt you to choose a personal ring.
(See "Creating a new entry" on page 27.)
Append the selected phone number to an existing phonebook entry. The
Store & Edit
phone prompts you to select the phonebook entry you want to add the number
to, then opens that entry for editing. (See "Editing an existing entry" on page 27.)
Delete Entry
Erase this entry from the CID or redial list.
Erase all entries from this station's CID or redial list. (This does not affect the
Delete All
CID or redial lists saved on any other stations.)
(CID list only) Add this entry to your call block list. (See "Using Call Block" on
Add Call Block
page 32.)

Using Seven-Digit Dialing

If you can make a local call by dialing only seven digits instead of ten, you can tell the phone to hide
your local area code in the CID list.
n
Note: Do not enter an area code if your phone company requires ten-digit dialing. You might
not be able to dial from the CID list.
1. With the phone in standby, open the menu and select
2. Select Line 1 or Line 2
3. Use the number keypad (0 - 9) to enter a three-digit area code.
4. Press OK when you have fi nished.
• The phone uses the programmed code as a fi lter. When calls come in, the phone compares the
incoming area code to the one programmed for that line. If they match, the phone hides the
area code in the CID list.
• While reviewing the list, press # to toggle the area code off and on.
• When you dial from the CID list or save the number to the phonebook, the phone dials or stores
the number exactly as it is currently displayed.

Using Call Waiting

• A Call Waiting call refers to a call received on a line while that line is already in use.
• Call Waiting and Caller ID on Call Waiting are services provided by your telephone company. You
must subscribe to these services to use these features.
• Call Waiting is independent for each line: Call Waiting calls do not roll over to the second line.
• When you get a Call Waiting call, the phone sounds a tone and displays any CID information
received for the waiting call.
• To answer a Call Waiting call, press
phone company automatically puts the current call on hold and switches you to the waiting call.
• Use FLASH and TALK ( )/FLASH to switch between the two calls; remember, each time you
switch, there is a short pause before you're connected to the other caller.
, and then select Area Code
FLASH on the base or TALK ( )/FLASH on a handset. The
25
Global Setup .
.