De-Register The Handset - Radio Shack 43-3703 Owner's Manual

3. Press
CID/VOL/
select
Tone
setting is Tone).
4. Press the
OK
confirmation tone.
Setting Voice Mail Tone
Voice Mail Tone sets the voice mail tone. If
your service does not support SDT
message signal, set your VMWI (Visual
Message Waiting Indicator) not to detect
SDT message signal.Ô
1. Press
MENU
Setup menu, and then the Voice Mail
Tone Submenu.
2. Press
CID/VOL/
select L1 or L2
soft key.
3. Press
CID/VOL/
the voice message indication (SDT
message signal) to
4. Press the
OK
confirmation tone.
D -
E REGISTER THE
Deregister HS clears the handset's ID from
the main base unit and the base ID from the
handset. You will usually only deregister the
handset if you are having a problem with
your phone.
1. In standby mode, select Deregister HS
in the menu and press the
Deregister HS?
2. Press
CID/VOL/
select Yes and then the
When de-registration is complete, you
will hear a confirmation tone, and
Deregistration Complete
appears.
or
REDIAL/P/
or (the initial
Pulse
soft key. You will hear a
soft key. Select the Global
or
REDIAL/P/
, and then press the
or
REDIAL/P/
On or Off .
soft key. You will hear a
H
ANDSET
OK
appears.
or
REDIAL/P/
soft key.
OK
to
The phone company
provides voice mail signal in
either of the two formats,
FSK (Frequency_Shift
Keying) or SDT (Stutter Dial
Tone). Check with your
phone company which
to
format they use.
OK
to set
soft key.
to
Ô Ô
NOTE
27