Radio Shack 43-3703 Owner's Manual page 34

34
Joining a Conference Call
You can easily join a call already in
progress.
1. Press corresponding soft key (
) on the handset to join the call.
LINE2
2. To hang up, return the handset to the
cradle, or press
Other handset will still be connected to
the call.
Conferencing with one outside
line
To hold a conference call with one outside
line, simply have the handsets join the call.
Conferencing with 2 outside lines
Follow the steps below to allow both outside
lines to participate in a conference call:
1. During a call, press
handset to put the first caller on hold.
2. Press the line soft key (
for a free line to make or answer a
second call.
3. When the second call is connected,
press
CONF
call.
4. To disconnect a single caller, press the
corresponding soft key (
to place the caller you wish to keep
speaking to on hold and then press the
soft key to hang up the other
END
caller. For example, to hang up Line 2
but leave Line 1 connected:
• Press the
1 on hold.
• Press the
Line2.
on the handset.
END
INTCM/HOLD
or
LINE1
to initiate a conference
or
LINE1
soft key to put Line
LINE2
soft key to hang up
END
or
LINE1
on the
)
LINE2
)
LINE2