Connect The Handset; Phone Settings - Radio Shack 43-3901 User Manual

3

Connect the handset

Plug one end of the supplied coiled cord into the handset's
modular jack. Connect the other end to the base.
n
Note: Your local RadioShack store sells a variety of longer
coiled handset cords.

Phone Settings

1. Press and hold both UP and DOWN for about four seconds
until ENTER LANGUAGE displays
2. ENG ESP FRA appears, with ENG flashing. Press UP or DOWN
to select the desired language, then press DELETE to confirm.
3. LCD CONTRAST and 1 2 3 4 5 appear on the display, with
3 flashing. Press UP or DOWN to select the contrast level
(1-5), and press DELETE to confirm.
4. ENTER AREA CODE appears, then _ _ _ appears, with
the first _ flashing. Press UP or DOWN to select the first
number of your area code, and press DELETE to confirm
the selection.
5. The flashing _ goes to the next digit. Repeat step 4 to set
the second and the third digits.
6. ENTER TIME DATE appears, and the hour digit flashes. Press
UP or DOWN to select the desired hour. (PM appears for
PM hours.) Press DELETE to confirm.
7. Repeat step 6 to set the minutes, month, and date.
Ringer
If you do not want to hear the phone ring, slide RINGER to
OFF. You can still make calls with the ringer off, and you can still
answer calls if you hear another phone on the same line ring.
The NEW CALL indicator flashes when the phone rings, even
when the ringer is off. If you want to hear the phone ring, set
RINGER to HI or LO.
6