Power Saver Mode
The printer has a power saving feature which reduces power consumption during periods of inactivity.
This feature operates in two modes: the Low Power mode and Sleep mode. By factory default, the
printer switches to the Low Power mode one minute after the last job is finished. The printer then
switches to the Sleep mode after another 6 minutes of inactivity. In the Power Saver mode, the
(Ready) LED blinks slowly.
The factory default settings are changeable within the range of 1 - 30 minutes (Low Power mode) and
6 - 11 minutes (Sleep mode). The printer returns to the ready-to-print state in about 25 seconds when
re-activated.
35
Basic Operation