Specifications - Fuji Xerox DocuPrint P215 b User Manual

Specifications

This chapter lists the main specifications of the printer. Note that the specifications may change
without prior notice.
Items
Type
Printing method
Fusing system
Warm-up Time
Continuous print speed
First print
Resolution
Tone
25 Specifications
Desktop
LED Xerography
IMPORTANT:
• LED + LED electrophotographic system
Thermal fusing system using a belt
Less than 25 seconds (after powering on at 20 °C temperature)
*1
A4 : When plain paper is fed from the Multipurpose feeder (MPF)
Monochrome 1 Sided
IMPORTANT:
*1 Print speed may decrease due to factors such as paper type, paper size,
and printing conditions.
*2 When continuously printing a single document of A4
Monochrome 11 seconds (A4
(MPF))
IMPORTANT:
• Measurements based on Fuji Xerox test pattern. Time from printer
startup until output of the first page is complete. Except the time
when the printer controller receives or processes the print data.
Standard: 600 × 600 dpi
High Resolution: 1200 × 1200 dpi*
*: When printing in high resolution mode, printing speed may be reduced
due to image quality adjustment. Printing speed may also be reduced
depending on documents.
256 tones
Description
*2
: 24 sheets/min
/Fed from the Multipurpose feeder
1
.