Table of Contents
Advertisement
Operation
Copy Feature
1
Press PROGRAM once.
Press ▲or ▼to scroll until "COPY" is blinking. To
2
select, press PROGRAM once.
Press ▲ or ▼to scroll to the individual day you want to
3
copy from. "DFLT" (the default Factory Program) is also
a copy option. To select your preference, press
PROGRAM once.
Press ▲ or ▼to scroll to the day or group of days you
4
want to copy to. To select, press PROGRAM once.
Your selection has been saved and you have exited program
mode.
Time & Temperature Programming Example
In this example, the thermostat user wants to program the
weekend with a different schedule from the Factory Program.
The user wants the Saturday and Sunday program to be
identical.
Press PROGRAM once.
1
Press ▲or ▼to scroll until "SET" is blinking. To select,
2
press PROGRAM once.
Press ▲or ▼to scroll until "SASU" is blinking. To
3
select, press PROGRAM once.
Press ▲or ▼to scroll until "WAKE" is blinking. To
4
select, press PROGRAM once.
Press ▲or ▼to scroll hours to "8: ". To select, press
5
PROGRAM once.
Press ▲or ▼to scroll minutes to " :30". To select, press
6
PROGRAM once.
User wants to keep same HEAT setpoint temperature. To
7
keep unchanged, press PROGRAM once.
User wants to keep same COOL setpoint temperature. To
8
keep unchanged, press PROGRAM once.
Now you're done setting up the Wake period, and ready to set
up the other three time periods for Saturday and Sunday:
• Program the Day period for SASU by repeating steps 1
through 8, but in Step 4, select "DAY".
• Program the Evening period for SASU by repeating steps 1
through 8, but in Step 4, select "EVE".
• Program the Sleep period for SASU by repeating steps 1
through 8, but in Step 4, select "SLEEP".
Now you're done setting up all four time periods for SASU.
10
Overriding the Program
Your thermostat's HOLD feature allows you to put the
thermostat in manual operation for either a specified or
indefinite length of time. HOLD will override your
programmed settings, but does not lose them.
Setting up a Temporary Hold
You may set up a temporary hold by hours and/or days.
1
Press PROGRAM once.
Press ▲or ▼to scroll until "HOLD" is blinking. To
2
select, press PROGRAM once.
3.Press ▲or ▼to scroll through options. "DAYS" allows
3
you to specify 0-99 days hold; "HRS" allows you to
specify 0-24 hours hold. To select your preference, press
PROGRAM once.
Press ▲or ▼to scroll to the desired length of time. To
4
select, press PROGRAM once.
The thermostat is now on hold for the time period you
selected, unless you decide to turn it off earlier. (See
off a
Hold.)
Setting up a Permanent Hold
Press PROGRAM once.
1
Press ▲or ▼to scroll until "HOLD" is blinking. To
2
select, press PROGRAM once.
Press ▲or ▼to scroll to "ON". To select, press
3
PROGRAM once.
The thermostat is now on hold until you manually turn off the
hold. (See
Turning off a
Hold.)
Turning off a Hold
1
Press PROGRAM once.
Press ▲or ▼to scroll until "HOLD" is blinking. To
2
select, press PROGRAM once.
Press ▲or ▼to scroll to "OFF". To select, press
3
PROGRAM once.
The thermostat will now resume your programmed time and
temperature settings.
For an easy planning refer to the Custom Program Worksheet
(Annex I‚ page
16).
Turning
Daikin IM 1019
Advertisement
Table of Contents
