Program Set Up; User Functions - Daikin BACnet Series Installation Manual

Program Set-Up
Entering a User Password
User functions may require a password consisting of four numbers.
Once a user password is entered it will remain active for 60 seconds
after the last button is pushed.
Table 3: Entering a User Password
Procedure
Starting display
Enter the Level 1 password
Changing the Active Setpoints
To enter or change the active temperature setpoints you may need to
enter a user password.
NOTE: In the following procedure the current active setpoint –
either cooling or heating – is the first setpoint to change.
Once that setpoint is entered, the display advances to the
next setpoint.
Table 4: Changing the Active Setpoints
Procedure
Starting display
Change the active setpoints
IO-DAPPS
Steps
Start at the temperature display
1. Press any button on the BACnet™ Thermostat. The display changes
to the Security User Level display.
2. Press either the ▲ or ▼ button to change the first digit
of the password.
3. Press the Enter button to select the next digit. Repeat for all
four digits.
4. If the password is correct, the display will advance to the
first menu.
Steps
Start at the temperature display
NOTE: The next step may require a user password.
1. Press either the ▲ or ▼ button to change the active
temperature setpoint.
NOTE: A user password may be required after pushing the
first button.
2. Press the Enter button to save the value. The display will advance
to the next setpoint.
3. Press the ▲ or ▼ button to change the next setpoint.
4. Press the Enter button to save the value. The display will return to
the temperature display.
www.daikinac.com
Display
Display
10