Jewelry Hunting - Bounty Hunter Time Ranger Owenrs Manual

Jewelry Hunting

When targeting jewelry items, consider where these items are commonly
lost. There are many possibilities, including playing fields where a variety
of sports take place, beach areas, playgrounds, and sandboxes.
Recommended mode of operation
Since the main objective when jewelry hunting is to detect all gold
items, the recommended mode of operation is DISCRIMINATION
mode with the following settings.
PRESET Level 3 (P3)
Try using the third level of PRESET (PRESET 3). See the DISCRIMINATION
Mode, To select PRESET targets section of this manual for instructions on
how to select PRESET levels. The third level of PRESET eliminates most
trash items while detecting most all coin types and other possible gold and
silver items similar to the coin types (such as jewelry). Fortunately, most
small gold items fall under the 5¢ indication. Also, make sure that you
accept all 4 levels of iron, since small gold rings may fall in the IRON/FOIL
range. While you will dig up a lot of trash in this setting, you are
guaranteed that no gold items are escaping detection.
Customized target selection
You may also want to customize your selection of targets, depending
on what type of trash you are encountering. For example, if you're
encountering many pull tabs but very little iron, try eliminating pull
tabs only. See DISCRIMINATION Mode, To customize targets section
of this manual for instructions on how to customize your targets.
33
When jewelry hunting, it is not uncommon to find
many coins in the process of digging up rings.